From what I've read about the plow you're speaking of, it should work well once a front mounted receiver like part # 31367 is installed. I've linked you to a video showing the hitch being installed on a 2008 FJ Cruiser. view full answer...
Derale remote transmission/engine oil cooler # D15220 is a great choice for your 2007 Toyota FJ Cruiser. No adapters are needed for the transmission cooling part except for # D13004. For the oil cooler part you will need installation kit # D15751.
You may need to use a shorter oil filter which in this case Wix filter 51381 is the shortest one that is compatible (3.14 inches tall). view full answer...
The length of hose that comes with the Derale transmission coolers like part # D12902 is 10 feet. That is usually adequate for most vehicles, but on a larger SUV like your 2011 Toyota FJ Cruiser a long hose like part # D13017 could be needed.
In most cases the line needed can be pretty short since typically the fittings and lines that get removed and used are all right near the radiator. Typically you don't need a long section of hose unless you are going from the transmission all the... view full answer...
I will be happy to help you out. The Thule Hullavator kayak carrier, # TH898, needs to be mounted on crossbars that extend beyond the side rails or foot pack. It will not fit any other way. So to add compatible crossbars to your 2014 Toyota FJ Cruiser that has factory crossbars you can use the Thule rack using parts # TH712400 and # TH710401.
These bars mount to the side rails and also include locks to deter theft. Enough of the bars will be sticking out each end to use the Hullavator.
Another... view full answer...
The Rhino-Rack Ski Rack with Locks # RR572 that you referenced is a confirmed fit for the factory crossbars of your 2007 Toyota FJ Cruiser. view full answer...
We have custom fit catalytic converters that are a direct fit for your 2007 Toyota FJ Cruiser with the part # MF49211 for the passenger side and the part # MF49210 for the other side.
Or for a universal style converter that you could weld in place of your bad ones the part # MF51205 is a fit as well. view full answer...
For your 2007 Toyota FJ Cruiser that has factory raised side rails you'd need a set of crossbars that extend past the feet of the rack like the Malone AirFlow 2 rack part # MPG216 which is a fit for your vehicle and would work great with the Thule Hullavator part # TH898 that you mentioned. view full answer...
We have a couple options for a roof rack on your 2011 FJ Cruiser that uses the fixed mounting points.
The first roof rack I recommend is the Rhino-Rack Vortex Roof Rack. This system features black, aluminum aerodynamic crossbars with Vortex strips in the C-channels to help reduce wind noise. The custom leg kit and adapters install in the OEM mounting points on your roof you said you have for a clean custom look. The weight capacity for the roof rack is 165-lbs but you want to make sure... view full answer...
Yes, we have a 7-way trailer wiring harness for you that uses the existing 4-way trailer connector and we have a brake controller that does not require you to splice into the stop light switch circuit. For this, I recommend using the Curt Universal Installation Kit for Trailer Brake Controller part # C57186 along with the Curt Echo Mobile Trailer Brake Controller part # C51180.
The Curt Universal Installation Kit will plug into the 4-way you have now as mentioned above and the only other... view full answer...
For your trailer with up to 500 pounds tongue weight you can use a system that is rated for 200 to 600 pounds tongue weight. But first, when calculating tongue weight you go by the tongue weight of the trailer when loaded and ready to tow plus the weight of anything loaded behind the rear axle of the tow vehicle. If that puts you under 600 pounds still then I recommend # RP66082.
This is the same system that you referenced, # RP66072, but it comes with a shank whereas RP66072 does not.... view full answer...
The Swagman Original bike rack part # S64400 that you referenced will fit your 2011 Toyota FJ Cruiser and clear the rear spare of the vehicle as long as you have a hitch installed like the # 75461 which is a 2 inch hitch confirmed as a fit for your vehicle. You could also look at the 3 bike rack to this is the Swagman Original part # S64152-2 . view full answer...
For mirrors that are much taller than normal mirrors like those on your 2007 Toyota FJ Cruiser, I recommend going with a door mount mirror, # 11650. The door mount is going to give you the best performance and vision. I have linked a video showing a typical installation for you. view full answer...
Your 2014 Toyota FJ Cruiser has a pretty unique mirror shape so to install tow mirrors you'll need to use a door mount style like the part # 11650-2 as nothing we offer would be able to attach directly to the mirrors that you have. Door mirrors are super stable and adjustable though so you'll really like this kit.
I attached a review video for more info on them as well. view full answer...
Absolutely! It sounds like you already know what you need but are looking for the easiest to install products that have the best value. For a 4-way, I recommend the T-One Vehicle Wiring Harness part # 118405. The installation process for this harness will be the same as the other options we have for you but we find that Tekonsha brand wiring products tend to be the most reliable which is why I recommend this for you.
For a 4 to 7-way adapter with both 4 and 7-way trailer connection points,... view full answer...
To add a 7-Way trailer connector and brake controller to your 2007 Toyota FJ Cruiser there are a few parts you will need. First, if the FJ does not have any sort of trailer connector already you will start by adding a 4-Way flat connector, # 118405. If it already has a 4-Way skip to the next paragraph.
Once the 4-Way is installed you will then need # ETBC7 to add the 7-Way and wiring/accessories to make the 7-Way active and install a brake controller. I have included some links that show... view full answer...
I don't know how much space additional length you need but the shortest option is reducer sleeve # HT02 which will give you 3 additional inches beyond the hitch pin hole on the hitch on your 2015 Toyota FJ Cruiser. So on the T2 Classic # TH9045 the distance from the center of the hitch pin hole on the hitch to the nearest part of the rack when folded will be 6-1/2 inches.
The next shortest is # 80300 which adds another 7 inches.
If you are able to use adapter # HT02 it will not reduce... view full answer...
Thule shows the SnowPack ski carrier # TH7325 as a fit to the factory crossbars on your 2014 Toyota FJ Cruiser so its strange that it isn't working. Before going through the expense of alternate bars first make sure that the straps on the carrier are all the way out. There might be a little slack left over to work with.
If it still doesn't work then the most low-profile bars that will fit the vehicle are the AeroBlade Edge bars, # TH7502-TH7503 for silver or # TH7502B-TH7503B for black... view full answer...
I would recommend the Thule SUP Taxi Carrier part # TH810001 because I checked with Thule and they have confirmed this rack as a fit for your vehicle and because it can easily carry two paddleboards.
Check out the review video I attached for more information as well. view full answer...
For your 2007 Toyota FJ Cruiser, you will need a roof rack for a rooftop cargo basket. For this roof rack, I recommend the Rhino-Rack RVP Roof Rack for Fixed Mounting Points - Vortex Aero Crossbars # RRRVP25.
This will fit to the OEM fixed mounting points on your FJ like what you see in the Highlander in the attached video. This will mean the suicide doors will not be an issue.
Once you have this system, you can add a cargo basket or box. I've attached a video and added a link to all... view full answer...
Adding suspension enhancement like Timbrens will help with sag and increase stability and ride quality. If your 2011 Toyota FJ Cruiser is a 4-wheel drive model, for the front you can use # TTOFTAC4A that you have referenced. There is no option for the front if it is a 2-wheel drive model.
For the rear if it is 2- or 4-wheel drive use # TTORSEQ. I have included links to the instructions for both sets for you to view. I have also included a link to our FAQ article on Timbren suspension enhancemen... view full answer...
Go To Results